| Control hardware |
| CPU | 1. LS1043A
--> 64bit ARM cortexA53
--> 4 cores
--> up to 1.6GHz |
| DDR | 1.MICRON
--> 512MB~4GB
--> 32bit wide ---8bit*4
--> up to 1.6GT/S |
| ROM | 1.MICRON eMMC
--> 8GB~64GB eMMC
--> HS200
--> 4bit wide
2.ATMEL EEPROM
--> 16KB |
| RTC function | SUPPORT |
| Temperature monitoring | 1.LM75,Close to the LS1043A |
| USB | 3*USB3.0 |
| WAN | 1.REALTEK GE PHY
--> 2*RTL8211FS RGMII to 1000base-t |
| RS485 | 1.MAXLINEAR USB TO UART
--> 1*XR21B1424 USB-4UART
--> 4*XR3078 RS485 |
| RS232 | 1.MAXLINEAR UART
--> 2*SP3232 RS232 |
| Switch quantity | 4 *Switching input 4 *Channel switch output of dry contact |
| RESET | 1. Support 1-way manual reset 2. Support 4-channel voltage monitoring reset 3. Supports hardware watchdog reset |
| Switch hardware |
| MAC | BCM53162 |
| POE Total power supply (external power supply) | MICROSEMI PD69104
--> support IEEE802.3 af/AT POE power |
| Temperature monitoring | LM75,close to BCM53162 |
| LAN | 8个10/100/1GBASE-TX/T RJ45 port
--> Two support 60W 802.3AT power Two 1GBase-X SFP interfaces |
| Port form |
| Fixed ports | WAN:2*10/100/1000BASE-TX/T RJ45
LAN:8*10/100/1000BASE-TX/T RJ45 + 2*1000BASE-X SFP
UART:4*RS485 + 2*RS232
switch qty:4*DI + 4*DO
USB:1* TYPEA USB3.0 | WAN:2*10/100/1000BASE-TX/T RJ45
UART:4*RS485 + 2*RS232
switch qty:4*DI + 4*DO
USB:1* TYPEA USB3.0 |
| WAN | Use single port with yellow and green double LED shielded transformer - free RJ45 |
| LAN | Use 1*8 with yellow and green double LED shielded transformer RJ45; Single-port SFP Cage was used |
| UART | Use single row Phoenix terminal, single port 3pin |
| Switch quantity | Use double row phoenix terminal, single port 2pin |
| USB | Support current limit, current limit of 500mA, use single port USB3.0 blue core interface |
| Optical module | Supports mainstream 1GBASE-SX/LX X-ray modules Supports GE photoelectric conversion module |
| power | Single row 10A Phoenix terminal power supply
-->2pin 12V power
-->2pin 48V power |
| Product form |
| SIZE(W*D*H) | 212.7*127*63mm |
| Cooling way | The whole machine natural heat dissipation |
| Panel lighting mode | RJ45 supports two-color light;Green is 1000m, yellow is 10/100m; LINK is always bright, ACTIVE is flashing; SFP uses external green plug-in LED to indicate port status; Support SYS/PWR green plug-in LED to indicate status | RJ45 supports two-color light;Green is 1000m, yellow is 10/100m; LINK is always bright, ACTIVE is flashing; Support SYS/PWR green plug-in LED indicating status; |
| Working environment |
| Working temperature | Supports two optional specifications: Industrial standard: -40~85℃; Wide temperature standard: -10~70℃; 1800 to 5000 meters: 1℃ lower for every 300m elevation; The life cycle of the equipment is calculated according to 5 years; |
| Storage temperature | From -40 to 85℃ |
| Stored relative humidity | 5%－95%(no lon) |
| Operating relative humidity | 5%－95%(no lon) |
| Mechanical vibration | Sinusoidal vibration operation (Working vibration):5-200Hz: 10m/s2 ;
Shock operation (Working impact):half sine, 11ms, 100m/s2; |
| Transport | Packaging and transportation up to ETSI 300019 Class 2.3: Public transportation |
| Safety EMC |
| CCC certification | available |
| CE | CISPR22 CLASSA |
| RE | CISPR22 CLASSA |
| CS | Support GE network:0.15~80MHz:3V,according to A |
| RS | CISPR22 CLASSA |
| SURGE | Support GE network:Common mode 8kV(1.2/50us), Differential mode1KV(1.2/50us)
Support RS485 port:Common mode 8kV(1.2/50us), Differential mode4KV(1.2/50us) |
| EFT | Support GE network:Common mode 2kV(1.2/50us)
RS485 port:Common mode 2kV(1.2/50us) |
| ESD | Support IEC61000-4-2,Contact Discharge at 6KV/8KV,Air Discharge at 8KV/15KV |
